Widely used in the Department of Defense UMCS contracts, the ALT-900 is an ideal wireless Echelon transceiver for monitoring of sub-meters using Echelon protocols for remote buildings.
The WLT900 wireless LonWorks transceiver is available for any Echelon application. The wireless transceivers are a reliable low-cost alternative option for long runs of communication cable or remote locations that were previously unreachable. The WLT900 devices have a true plug-and-play set-up requiring no special programming or network management tools. Using a HyperTerminal program and notepad configuration files, setup is simple.
The AIC900-E allows you to install a close or long range point-to-multipoint wireless Echelon networks at a fraction of the cost of a wired solution along with security options to protect the wireless network.
902-928 MHz (Direct Sequence Spread Spectrum - DSSS) | |
1.536 Mb/s | |
935 Kb/s | |
+21 dBm (4 Watts EIRP when used with 15 dBi antenna) | |
-97 dBm at 10e-4 BER (-112 dBm with 15 dBi antenna) | |
148 dB with 15 dBi antenna | |
40 Miles LOS with 15 dBi antenna | |
12 non-overlapping | |
RPSMA, 2 Pin Power Plug , Ethernet RJ45 10/100BaseT | |
Transmit: 2.4 W, Receive: 1.7 W (100ma @ 24VAC/DC) | |
12-24 VAC/DC (isolated power supply required) | |
-20° C to 70° C (-4° F to 158° F) | |
4.3” x 3.35” x 1.75” (109mm x 85 mm x 44.5mm) | |
.6 lbs | |
FCC: R4N-AW900M IC: 5303A-AW900M | |
LonWorks ® FT-10 Security Module FIPS-140.2 |