WLT900 Wireless LONWORKS® Transceiver

WLT900Trans2
  • Widely used in the Department of Defense UMCS contracts, the ALT-900 is an ideal wireless Echelon transceiver for monitoring of sub-meters using Echelon protocols for remote buildings.

    The WLT900 wireless LonWorks transceiver is available for any Echelon application. The wireless transceivers are a reliable low-cost alternative option for long runs of communication cable or remote locations that were previously unreachable. The WLT900 devices have a true plug-and-play set-up requiring no special programming or network management tools. Using a HyperTerminal program and notepad configuration files, setup is simple.

    The AIC900-E allows you to install a close or long range point-to-multipoint wireless Echelon networks at a fraction of the cost of a wired solution along with security options to protect the wireless network.

  • 902-928 MHz (Direct Sequence Spread Spectrum - DSSS)
    1.536 Mb/s
    935 Kb/s
    +21 dBm (4 Watts EIRP when used with 15 dBi antenna)
    -97 dBm at 10e-4 BER (-112 dBm with 15 dBi antenna)
    148 dB with 15 dBi antenna
    40 Miles LOS with 15 dBi antenna
    12 non-overlapping
    RPSMA, 2 Pin Power Plug , Ethernet RJ45 10/100BaseT
    Transmit: 2.4 W, Receive: 1.7 W (100ma @ 24VAC/DC)
    12-24 VAC/DC (isolated power supply required)
    -20° C to 70° C (-4° F to 158° F)
    4.3” x 3.35” x 1.75” (109mm x 85 mm x 44.5mm)
    .6 lbs
    FCC: R4N-AW900M IC: 5303A-AW900M
    LonWorks ® FT-10
  • Resources of WLT900 Wireless LONWORKS Transceiver